|
pH
& ORP Electrodes
& Probes
1.
Glass body electrode versus Epoxy (plastic) body
electrode: Glass body electrodes stand higher temperatures
(typically 100 C against 80 C for plastic) and are
more resistant to corrosive chemicals and solvents. They
are easier to clean and are available in different shapes
depending on the application. On the
other hand plastic body electrodes are more rugged and the glass bulb is
better protected.
2. Gel
filled electrodes versus refillable electrodes: refillable electrodes
last longer since electrolyte can be changed
for repeated usage. The response is
faster due to a greater outflow of electrolyte into
the sample and therefore less likely to clog. Gel filled
electrodes require less maintenance and resist to higher
pressure.
3.
Double reference junction versus Single junction reference: Double
junction reference electrodes have a longer
live and protects the sample measured from silver contamination
from the electrolyte. The Silver wire is
more protected and therefore gets less contaminated.
The single junction electrodes normally costs
less and is ideal for general purpose applications
4.
Conic shaped versus Sphere shaped: The conic shaped electrode
is easier to clean and to maintain (ideal for
applications such as dairy). Has a more rugged tip and
therefore ideal for penetration. The
sphere-shaped has a faster response time due to the larger surface area on
the bulb.
pH, ORP,
Conductivity, Dissolved Oxygen Electrodes & Probes
Milwaukee has a wide
assortment of pH, ORP, Conductivity and other specialty sensors to meet all
your specific
requirements.
Finding the right electrode for a specific application is a very important
task and In order to solve this
selection problem it is important to consider the following: electrode body,
reference construction and
junction.
Below you will find a list of Milwaukee electrodes and probes. Special
electrodes for specific applications
can also be manufactured upon request.
 |
MA811/2 |
Conductivity probe with 2m cable
$72.00 |
 |
MA812/2 |
Conductivity probe with 2m cable
$72.00 |
 |
MA812D/1 |
EC/TDS probe with DIN connector and
1 m cable
$72.00 |
 |
MA814D/1 |
4-ring EC probe with DIN connector
and 1 m (3.3’) cable $159.50 |
 |
MA815/2 |
Conductivity probe for SMS315 with
2 m cable
$86.13 |
 |
MA816/2 |
Conductivity probe for SMS415 with
2 m cable
$86.13 |
 |
MA831R |
Temperature probe
$83.62 |
 |
MA840 |
Polarographic D.O. probe with 3
meter cable
$280.38 |
 |
MA850 |
pH/EC/TDS spare probe with 1 m
cable
$120.59 |
 |
MA851D/1 |
pH/EC/TDS/Temp amplified probe with
DIN connector, 1 m (3.3’) cable
166.34 |
 |
MA911B/1 |
Double junction, gel filled pH
electrode with BNC connector, 1 m cable
$84.88 |
 |
MA913B/3 |
Combined Epoxy pH electrode, BNC
connector, for swimming pool, 3 m cable
90.52 |
 |
MA914BR/1 |
pH/Temp amplified probe with BNC &
RCA connectors, 1 m cable
203.31 |
 |
MA915B/2 |
Combined glass pH electrode for
agriculture with BNC connector, 2 m cable
$123.10 |
 |
MA915B/3 |
Combined glass pH electrode for
agriculture with BNC connector, 3 m cable
$123.10 |
 |
MA916B/1 |
Combined glass pH electrode,
refillable with BNC connector, 1 m cable
$151.30 |
 |
MA916B/3 |
Combined glass pH electrode,
refillable with BNC connector, 3 m cable
$156.94 |
 |
MA917B/1 |
Glass body, double junction
refillable pH electrode with BNC connector, 1 m cable
$208.32 |
 |
MA918B/1 |
Combined glass pH electrode,
refillable with 3 diaphragm with BNC, 1 m cable
$195.16 |
 |
MA921B/1 |
Double junction, gel filled ORP
electrode with platinum sensor, BNC, 1 m cable
$88.64 |
  |
MA921B/2 |
Double junction, gel filled ORP
electrode with platinum sensor, BNC, 2 m cable $88.64 |
 |
MA923D/1 |
pH/ORP/Temp amplified probe with
DIN connector, 1 m cable $307.95 |
 |
MA923B/3 |
Epoxy electrode redox, BNC
connector, for swimming pool, 3 m cable $93.65 |
 secure
order page |
