home page

Products > Monitors > SMS315
Instruction Manual
 
Instruction Manual
Print
Print

SMS315 Smart Conductivity Monitor with Cal-test button

Milwaukee’s low cost durable meters for quick and reliable measurements. The Smart monitors are designed to continuously monitor pH, EC or TDS values directly in your reservoir. Its user selectable setpoint allows you to set a visual alarm when the pH, EC or TDS level rises above the setpoint. All these instruments run on a 12V adapter so there’s no need to worry about failed batteries.

Smart monitors are very simple to operate: 1. Hang your monitor above your reservoir 2. Connect the adapter to the meter and plug in the power supply 3. Immerse 2/3 of the electrode in the solution 4. The electrode can now remain there permanently.

The SMS315 is a reliable conductivity monitor with automatic temperature compensation and 1 point manual calibration powered by a 12 VDC adapter. The SMS315 allows you to continuously monitor EC values directly in your reservoir. The Cal-test feature will warn the user (through an LED) when the probe needs to be calibrated again!

SMS315

MA815/2
Conductivity probe for SMS315 with 2 m cable

Calibration, Maintenance & Cleaning Solutions
Choose from our wide selection of calibration, maintenance and cleaning solutions.
SPECIFICATIONS
Range 0.00 to 9.99 mS/cm
Resolution 0.01 mS/cm
Accuracy ±2% Full Scale
Environment 0 to 50°C / 32 to 122°F; max RH 95%
Probe MA815/2 (included)
Power Supply 12 VDC power adapter (included)
Dimensions 85 x 104 x 39 mm
Weight 130 g (meter only)

 

 
 
 
 
ACCESSORIES
MA815/2 Conductivity probe for SMS315 with 2 m cable
M10031B 1413 µS/cm calibration solution,
20 ml sachet (25 pcs)
M10032B 1382 ppm calibration solution,
20 ml sachet (25 pcs)
M10039B 5.00 mS/cm calibration solution,
20 ml sachet (25 pcs)
M10442B 1500 ppm calibration solution,
20 ml sachet (25 pcs)
M100020B Cal-Test solution for SMS315,
20 ml sachet (25 pcs)
 
ORDERING INFORMATION
SMS315 is supplied complete with 12VDC adapter, MA815/2 EC probe, 20 mL 1413 µS/cm sachet of calibration solution, 20 mL conductivity Cal-Test Solution, screwdriver for calibration and instruction.