SMS410 Smart TDS Monitor with set point range from 700 to 1900 ppm

Products > Monitors > SMS410

Instruction Manual

SMS410 Smart TDS Monitor with set point range from 700 to 1900 ppm)

Milwaukee’s low cost durable meters for quick and reliable measurements. The Smart monitors are designed to continuously monitor pH, EC or TDS values directly in your reservoir. Its user selectable setpoint allows you to set a visual alarm when the pH, EC or TDS level rises above the setpoint. All these instruments run on a 12V adapter so there’s no need to worry about failed batteries.

Smart monitors are very simple to operate: 1. Hang your monitor above your reservoir 2. Connect the adapter to the meter and plug in the power supply 3. Immerse 2/3 of the electrode in the solution 4. The electrode can now remain there permanently.

The SMS410 is a reliable TDS monitor with automatic temperature compensation and 1 point manual calibration, powered by a 12 VDC adapter. The SMS410 is ideal for the hydroponic market and allows you to continuously monitor TDS value directly in your reservoir. Other features include: user selectable set point, visual LED alarm when values go below the set point.

MA812/2
Conductivity probe with 2 m cable

Calibration, Maintenance & Cleaning Solutions
Choose from our wide selection of calibration, maintenance and cleaning solutions.

SPECIFICATIONS
Range	0 to 1990 ppm
Resolution	10 ppm
Accuracy	±2% Full Scale
Conversion Factor	0.7
Set Point	700 to 1900 ppm
Alarm	active when the measure is lower than the set point
Temperature Compensation	automatic, from 5 to 50°C
Environment	0 to 50°C / 32 to 122°F; max RH 95%
Probe	MA812/2 (included)
Power Supply	12 VDC power adapter (included)
Dimensions	165 x 80 x 40 mm
Weight	220 g (meter only)

ACCESSORIES
MA812/2	Conductivity probe with 2 m cable
M10031B	1413 µS/cm calibration solution, 20 ml sachet (25 pcs)
M10032B	1382 ppm calibration solution, 20 ml sachet (25 pcs)
M10039B	5.00 mS/cm calibration solution, 20 ml sachet (25 pcs)
M10442B	1500 ppm calibration solution, 20 ml sachet (25 pcs)

ORDERING INFORMATION
SMS410 is supplied complete with 12VDC adapter, MA812/2 TDS probe, 20 mL 1382 ppm sachet of calibration solution, screwdriver for calibration and instruction.