SMS510 Smart Redox Controller
With Milwaukee's Smart controllers you can monitor and control pH and/or ORP levels directly in your aquarium. All our controllers work with a 12 VDC adapter and can be hanged above your aquarium. The meters have a user selectable set point and a visual LED alarm that is active when the reading is higher (for pH) or lower (for mV) than the set point. Also the instruments are supplied with a power plug for CO2 or ozone dosing. With each Milwaukee Smart controller your aquarium will have the individual attention that it needs.
Every Aquarium needs individual attention. This is why the SMS510 has a user selectable set point for the ORP (0 to 600 mV). Simply plug the ozone generator into the controller’s power plug and it will dose until the mV set point is reached. The ozone generator will automatically switch on again if the ORP falls below the adjusted set point.
 |
MA921B/2 |
 |
Calibration, Maintenance & Cleaning Solutions Choose from our wide selection of calibration, maintenance and cleaning solutions. |
| SPECIFICATIONS | |
| Range | ±1000 mV (ORP) |
| Resolution | 1 mV (ORP) |
| Accuracy | ±5 mV (ORP) |
| ORP set point | 0 to 600 mV |
| ORP Alarm |
active when measurement is lower than set point |
| ORP Output Power Socket |
active when the measurement is lower than set point |
| ORP Electrode | MA921B/2 (included) |
| Environment | 0 to 50°C / 32 to 122°F; max RH 95% |
| Power Supply | 12 VDC power adapter (included) |
| Power Drivers | 115VAC, 2A, 60Hz or 230VAC, 1A, 50Hz |
| Dimensions | 145 x 80 x 40 mm |
| Weight | 220 g (meter only) |
| ACCESSORIES | |
| MA921B/2 | ORP Electrode with BNC connector and 2 m cable |
| M10004B | pH 4.01 buffer solution 20 mL sachet (25 pcs) |
| M10007B | pH 7.01 buffer solution 20 mL sachet (25 pcs) |
| M10010B | pH 10.01 buffer solution 20 mL sachet (25 pcs) |
| MA9015 | Electrode storage solution 20 mL sachet (25 pcs) |
| M10000B | Electrode rinse solution 20 mL sachet (25 pcs) |
| MA955 | Solenoid valve with 1.5 m cable |
| ORDERING INFORMATION | |
SMS510 is supplied complete with 12 VDC adapter, MA921B/2 ORP electrode and instructions. |
|